STEAMER ASSEMBLY
Attaching the Steamer Hose
Insert hose cap into steamer housing and rmly twist CLOCKWISE until
it no longer turns and it securely locks hose onto housing.
1. Align two arrow then inset 2. Press cap
the cap into housing
3. Turn clockwise 4. Till to align the arrow
Removing the Steamer Hose.
(ensure the steamer has cooled)
To remove hose, turn anti clockwise one quarter turn, THEN continue
to turn until it releases. Turn slowly.
One quarter turn Continue turn until
hose is released
To Next Page
Loading...
Need help?
General
