Need help?Do you have a question about the Concept Pro CVP9328DNIR-IP2M-Z and is the answer not in the manual?
Process of opening the camera packaging and separating parts.
Creating holes in the mounting surface using a template and fitting plugs.
Connecting cables and attaching the camera assembly to the base.
Fine-tuning the camera's viewing angle and securing it.
Details of external ports for network, audio, alarm, and power connections.
Location of MicroSD card slot, reset button, and analogue video output.
Using SVO cable and test monitor to display IP address.
Utilizing IPSearch software on a PC to scan and find camera IP.
Using the VLEDTM-TS7 monitor to discover the camera via ONVIF.
Finding the camera IP address using Bonjour on Mac Safari browser.
Solutions for issues preventing the detection of the camera's IP address.
Troubleshooting common problems connecting to the camera via web browser.
Addressing issues with video quality and stream performance.
Steps to unlock a camera user account after too many failed login attempts.
Important safety guidelines for installation and operation to avoid damage or injury.
Physical measurements of the camera, including diameter and depth.
Instructions to configure the camera for H.265 video compression via web interface.
General| Model | CVP9328DNIR-IP2M-Z |
|---|---|
| Resolution | 2MP (1920 x 1080) |
| Night Vision | Yes |
| IR Distance | Up to 30m |
| Weather Resistance | IP66 |
| Operating Temperature | -30°C to 60°C |
| Video Compression | H.265 / H.264 |
| Type | IP Camera |
| Day/Night | Yes (ICR) |
| Power Supply | 12V DC or PoE (802.3af) |
| Network Interface | RJ45 |
| Storage | MicroSD card slot (up to 128GB) |
To Next Page