Conceptronic C54APM - WEP Setting

ENGLISH
3.2.6 WEP Setting
Parameter Description
WEP Length WEP-64: input 10-digit Hex values (in the “A-F”,
“a-f” and “0-9” range) or 5-digit ASCII character
as the encryption keys.
WEP-128: input 26-digit Hex values (in the “A-F”,
“a-f” and “0-9” range) or 13-digit ASCII
characters as the encryption keys.
Mode HEX: input Hex values (in the “A-F”, “a-f” and “0-
9” range)
ASCII: input alphanumeric format.
Passphrase Enter passphrase and click “Generate”, then the
access point will automatically generate WEP
keys by the passphrase for you.
Key 1 - Key 4 To entry 10 Hex digits for 64 bit key, 26 Hex
digits for 128 bit key.
Default TX Key Select the WEP key used to encrypt data
transmitted in the wireless network.
Click Apply button at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the Access Point.