ENGLISH
3.2.11 Admin Setup
Parameter Description
FW Version It shows current FW version.
FW Upgrade This tool allows you to upgrade the Access
Point’s system firmware. To upgrade the
firmware of your Access Point, you need to
download the firmware file to your local hard
disk, and enter that file name and path in the
appropriate field on this page. You can also
use the Browse button to find the firmware file
on your PC. Please reset the Access Point
when the upgrade process is complete.
New Password Enter the password (up to 32-digit
alphanumeric string) you want to login to the
Access Point. Note that the password is case-
sensitive.
Reconfirm Password Reconfirm the password (up to 32-digit
alphanumeric string) you want to login to the
Access Point. Note that the password is case-
sensitive.
Click Apply button at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the Access Point.
To Next Page
Loading...
