Copyright
®
2007 by Conceptronic – All rights reserved
www.conceptronic.net
Page 2 of 4
Step 2: Connecting the TV/antenna cable on the digital TV tuner and CM3PVR
Refer to the manual of your digital TV tuner on how to connect the TV/antenna cable to the digital TV tuner.
Below you see an example of how to use a pass-through TV/antenna cable from the TV out on your digital TV
tuner to the TV in on the CM3PVR, so you will be able to view and record analog TV channels on the CM3PVR.
Step 3: Connecting the Conceptronic CM3PVR to the TV
Refer to the sixth chapter (“Connecting the CM3PVR”) in the CM3PVR manual on how to connect the CM3PVR
to your TV.
To Next Page
Loading...
