Conceptronic CM3PVR - Setup

Copyright
®
2007 by Conceptronic – All rights reserved
www.conceptronic.net
Page 4 of 4
Scheduled recording
1. Press button ‘6’ on the remote control of the CM3PVR or select the ‘Rec. Schedule’ icon from the
CM3PVR menu. The CM3PVR will enter the recording schedule page and automatically select an
empty recording slot.
2. Press the ‘ENTER’ button on the remote control of the CM3PVR and use the ‘UP’ and ‘DOWN’
buttons to select ‘AV’ as input. Press the ‘ENTER’ button again to go to the next option.
3. Select the recording date with the ‘UP’ and ‘DOWN’ buttons and use the ‘ENTER’ button to confirm.
4. Select the start time and use the ‘ENTER’ button to confirm.
5. Select the end time and use the ‘ENTER’ button to confirm.
6. Select the target and quality for the recording and use the ‘ENTER’ button to confirm.
Note: When using a USB stick or memory card, please make sure there is enough space available
for the recording. If there is not enough space available, you can change the quality of the
recording to reduce space. Refer to the last pages of the CM3PVR manual (“Product
Specifications”) for a list of required space with each quality.
7. When all settings are correct, the ‘STATUS’ field at the left of the screen will mention ‘READY’.
8. Now press the ‘MENU’ button to return to the main menu and press the power button on the remote
control of the CM3PVR to set it in stand-by mode.
Note: Do not use the switch on the back of the CM3PVR to turn off the device, since it will not be
able to turn on itself when a recording needs to be started. The device always needs to be in
stand-by mode when a recording is scheduled.
9. Make sure the digital TV tuner is set to the right channel for the recording and leave it turned on.
Note: Some digital TV tuners have the option to turn themselves on at a certain time an select the
right channel. This way you don’t have to leave the digital TV tuner on once the CM3PVR is
scheduled to record from the digital TV tuner. Refer to the manual of your digital TV tuner
to see if your digital TV tuner has this option and how to configure it.