Copyright
®
2009 by Conceptronic – All rights reserved
www.conceptronic.net
Page 2 of 4
In this example we use connection EXT1(RGB) as video output from TVDVB-T.
Connect the SCART adaptor to the video output of your TV. Connect one side of the composite cable to the
SCART adaptor and the other side to the AV Input “IN” of your CM3PVRD.
Note: Make sure that the RCA to SCART adaptor is set to OUTPUT mode.
Step 3: Connecting Conceptronic CM3PVRD to TV
Refer to chapter 6 (“Connecting the CM3PVRD”) in the CM3PVRD manual on how to connect the CM3PVRD to
your TV.
To Next Page
Loading...
