Copyright
®
2009 by Conceptronic – All rights reserved
www.conceptronic.net
Page 3 of 4
Step 4: Recording from TVDVB-T
When all cable connections have been made turn on your CM3PVRD and TVDVB-T. The menu of the CM3PVRD
will be shown on your TV. If this is not the case, refer to chapter 7 (“First-Time Configuration”) of the
CM3PVRD manual.
There are two methods to record from a digital TV tuner. The first one is to start recording instantly and the
second one is to schedule a recording.
Instant recording (One Touch Record)
1. Press button ‘4’ on the remote control of the CM3PVRD or select the ‘AV input’ icon from the
CM3PVRD menu. When the TVDVB-T tuner is on, you will see the video from the embedded DVB-T
tuner on your TV.
2. Use the remote control from TVDVB-T to select the (digital) channel from which you want to start
recording.
3. Press the red ‘RECORD’ button on the remote control of the CM3PVRD to start recording
instantly.
4. To stop recording, press the ‘STOP’ button on the remote control of the CM3PVRD.
Note: Do not turn off the CM3PVRD or TVDVB-T during the recording. Also do not press any buttons on
either of the remote controls or devices itself. Doing so might result in an incomplete recording.
To Next Page
Loading...
