Copyright
®
2009 by Conceptronic – All rights reserved
www.conceptronic.net
Page 2 of 6
B. Upgrade information
A firmware upgrade can improve the performance of your Conceptronic device and can sometimes add new
features.
Periodically firmware upgrades will be available via the official Conceptronic Website.
Conceptronic is not liable for any damages caused by an unofficial, not by Conceptronic approved firmware
for this specific Conceptronic device. Firmware upgrades, even while using official approved firmware, are
always at your own risk.
Installing new firmware without taking the following precautions into account will seriously harm the life
span of your Conceptronic device.
While installing new firmware, make sure the installation procedure is never interrupted.
Interruptions can, amongst others, be caused by:
- turning off the device;
- disconnecting the external USB device or memory card from where the upgrade process was started;
- disconnecting the power supply;
- pressing one or more buttons on the remote control or the device;
- a general power shutdown.
The Conceptronic CM3PVRD can be upgraded in three different ways:
- Through a USB Storage device (for example: a USB Stick)
- Through a Memory Card (for example: a SD Card)
- Through the internal hard disk
To Next Page
Loading...
