Concord Camera Eye-Q 3042 AF

Questions and Answers

O
oparkerSep 6, 2025
What to do if I cannot transfer pictures to the computer and the New Hardware Wizard cannot locate drivers for my Concord Camera digital camera? (Windows 98SE)
- J
  Jennifer DeanSep 6, 2025
  If you're having trouble transferring pictures to your computer and the New Hardware Wizard can't find drivers (Windows 98SE) for your Concord Camera digital camera: * The software may not be installed on the computer. Disconnect the Mini-USB cable from the camera and the computer. Install the camera software and drivers. (p.34) * The software may not be fully or correctly installed. Disconnect the Mini-USB cable from the camera and the computer. Uninstall the software: Start-Settings-Control Panel- Add/ Remove Programs. Re-install the camera drivers. (See p.34)
R
Regina WintersAug 22, 2025
How to fix Concord Camera Eye-Q 3042 AF Digital Camera that won't turn on?
- T
  tblakeAug 22, 2025
  If your Concord Camera digital camera won't turn on, there are several potential causes: * The batteries may not be installed correctly. Ensure they are installed according to the direction indicators on the edge of the battery compartment. * The batteries may be dead or weak. Try replacing them with fresh ones. * The battery compartment door may not be closed properly. Make sure it is fully closed.
K
Kimberly StephensonSep 3, 2025
What to do if my Concord Camera Eye-Q 3042 AF Digital Camera buttons don't work?
- M
  Megan SchneiderSep 3, 2025
  If the camera or its buttons aren't working on your Concord Camera digital camera, the camera may need to be reset. Press the reset button on the back of the camera with a pointed object such as a pen, then power the camera off then on.
C
carrheatherSep 2, 2025
Why is the LCD display dark on my Concord Camera Eye-Q 3042 AF?
- M
  Michael GreenSep 2, 2025
  If the LCD display on your Concord Camera digital camera is dark: * Check if the protective plastic film is still in place and remove it. * The LCD brightness level may be set too low. Increase the brightness level on your LCD to meet your personal needs. See p.27 for setting the brightness.
K
Kevin LeeAug 31, 2025
How to improve picture quality on Concord Camera Eye-Q 3042 AF?
- S
  Scott MckinneySep 1, 2025
  If your Concord Camera digital camera is producing pictures or video clips with poor image quality: * Ensure there is sufficient lighting in the surrounding area. * Clean the lens with a soft cloth. See the Camera Maintenance section. * Make sure the subject is within the appropriate distance: at least 3.3 ft. (1m) away in Distant Mode, or 0.66ft (20cm) away in Macro Mode.
C
cassiewrightAug 30, 2025
Why are my flash pictures too bright on my Concord Camera Eye-Q 3042 AF Digital Camera?
- W
  whowardAug 30, 2025
  If flash pictures taken with your Concord Camera digital camera are too bright, consider these points: * The subject may be too close. Move the subject further away from the camera. * The flash may not be needed. Change the camera setting to Auto Flash. See p.12. * The lighting condition may be too bright. Decrease exposure compensation. See p.18.
J
Jared SmithAug 29, 2025
Why does my Concord Camera Eye-Q 3042 AF turn off by itself?
- M
  Michael MccoyAug 29, 2025
  Your Concord Camera digital camera might be turning off during usage because: * The batteries are drained. Replace them with new ones. * The Auto time off setting is too short. If the camera is inactive for a certain time, it powers off to save battery. Please refer to the Time-Out section on page 27 to set your time limit.
B
Billy AlexanderAug 27, 2025
How to fix blurry pictures with Concord Camera digital camera?
- K
  Kelsey CurtisAug 28, 2025
  If your pictures are blurry when taken with your Concord Camera digital camera, here's what you can do: * Ensure that neither the subject nor the camera moved while the picture was being taken. Hold the camera steady. * Make sure the focus was locked before fully pressing the shutter button. Press the shutter button halfway to lock the focus before capturing the picture.
J
Joseph PhamAug 26, 2025
Why did the flash not work on my Concord Camera Eye-Q 3042 AF?
- M
  Melissa HarveyAug 27, 2025
  If the flash on your Concord Camera digital camera didn't work, consider these possibilities: * If the camera is set to Auto Flash, the flash may not fire if there was sufficient light already. This is normal. * The camera’s flash may have been turned off. Turn the flash to Auto flash. * The flash may not have charged. Verify that the Ready LED has stopped blinking before taking a picture.
J
Justin PruittAug 25, 2025
Why are my flash pictures too dark on my Concord Camera Eye-Q 3042 AF Digital Camera?
- J
  Jeremy EscobarAug 25, 2025
  If your flash pictures are too dark on your Concord Camera digital camera, it could be due to several reasons: * The subject may be too far away for the flash to be effective. Try moving the subject closer to the camera, or vice versa. * The flash might not be turned on. Ensure that the flash is activated. * The subject may be in front of a bright light. Adjust the subject's position. * The lighting condition may be too dark. Increase the exposure compensation.