EasyManua.ls Logo

CONCORD NEO - Harnessing System; Securing the Child

CONCORD NEO
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
40
_ USING THE HARNESSING SYSTEM
Feedthecentrestrapwiththebucklebetween
thechild’slegs.Theninsertthebuckle
adaptorsontheshoulderandwaiststraps
fromaboveintothetopofthebuckle.They
shouldclickaudiblyintoposition.
Shoulder strap
Centre strap
To open the harness system, press the button
in the middle of the buckle until the buckle
adaptorsarereleased..
Waist strap
Takecarethatyourchildisalwaysstrappedin,withthebucklefastened,
wheneveryougooutwiththepushchair.
Adjustthestrapssothattheyaretautandliecloseagainstthechild.
Toadjustthestraplength,slidethestrapclaspsupordown.Checkthat
thestrapsarenottwisted.
The childproof lock is on the back of
thebuckle.Thiscanbeactivatedand
deactivatedbyturning.Activatingthe
childproof lock locks the buckle opening
mechanism.
WARNING!
• Alwaysusetheshoulderandwaiststrapstogetherwiththecentre
strap.

Other manuals for CONCORD NEO

Related product manuals