CONCORD NEO - Setting the Seat Angle

35
_ SETTING THE SEAT ANGLE
Youcansettheseatframe’sangleofinclinationtoseveralpositions.
To do this, pull the adjustment handle (12) on the top edge of the seat
frameandadjusttheseatangleuntilitengagesintherequiredposition.
WARNING
• Anadditionalposition(P)allowstheCONCORDNEOtobefolded
 downextracompactly,butitmustbeusedsolelyforthispurposeand
 neverfortransportingachild.
34
Tip: Various elements can be
attached to the CONCORD
NEO by means of the ProFix
adapter.SomeConcord
accessories, available from
specialist retailers, are
equippedwithadapters
suitable for the CONCORD
NEO, making it easy to attach
them to the CONCORD
NEO.Checkbeforeuse
that the Concord accessory
has engaged properly in the
CONCORDNEO.Pleasealso
refer to the instructions for
useenclosedwiththerelevant
Concordaccessory.
To remove the seat frame from the chassis, pull simultaneously on the
right and left ProFix unlocking levers (06) on the seat frame and pull the
frameupwardsandawayfromthechassis.