RotaRy laseR
20
user manual
EN
CONDTROL Auto RotoLaser
11) Remove batteries from the product if it not used for a long time.
12) Do not leave discharged batteries in the product.
13) Avoid heating the batteries to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash it
immediately with soap and water. In case of contact with eyes, flush
with clean water during 10 minutes and consult the doctor.
UTILIZATION
Expired tools, accessories and package should be passed for waste
recycle. Please send the product to the following address for proper
recycle:
Condtrol GmbH
Wasserburger Strasse 9
84427 Sankt Wolfgang
Germany
Do not throw the product in municipal waste!
and their components must be collected separately and submitted to
environmentally friendly recycle of wastes.
WARRANTY
All Condtrol GmbH products go through post-production control and
are governed by the following warranty terms. The buyer’s right to
claim about defects and general provisions of the current legislation
do not expire.
1) Condtrol GmbH agrees to eliminate all defects in the product,
discovered during the warranty period, that represent the defect in
material or workmanship in full volume and at its own expense.
2) The warranty period is 24 months and starts from the date of
purchase by the end consumer (see the original supporting document).
To Next Page
Loading...
