RotaRy laseR
10
user manual
EN
CONDTROL Auto RotoLaser
Laser receiver
Laser receiver allows using the product outdoor as well as while
intensive sunshine at distance up to 400 m (in diameter) when it’s
difficult to recognize laser beam.
1 2 3
4
5
OPERATION
Battery charging
In case power indicator starts flashing while operation – batteries
need to be charged. Please use battery charger included in the set.
Full charging takes approximately 5 hours. While charging red light
indicator on battery charger will be on. As soon as indicator becomes
1. Turn on/off
2. Turn on/off sound signal
3. High/normal accuracy mode
4. Display
5. Receiver sensor
To Next Page
