Conel FLOW Series - Identification of Hints in Operating Instructions

17
1.1 Identication of hints in the operating instructions
Safety instructions given in this operating manual, the non-observance of which
could cause danger to life have been specically highlighted with the general
danger symbol. (See DIN 4844-W 9).
The presence of a dangerous voltage is identied with the safety symbol. (See DIN
4844-W 8).
Symbols directly on the unit itself, e.g.
> Direction of rotation arrow
> Name plate
must be carefully observed and must be maintained in a legible condition.
Dangers which could arise due to non-observance of safety instructions
The non-observance of the safety instructions can lead to danger to personnel and also
to possible harm to the environment or the unit itself. Non-observance of
the safety instructions can invalidate the rights of the user to any compensation or
redress.
In detail, non-observance can for example result in the following dangers:
> Failure of important functions of the unit/installation.
> Danger to personnel by electrical, mechanical or chemical inuences.
> Danger to the environment by leakage of dangerous substances.
Work in a safety conscious manner / Modication and spare parts / Unproven usage