Conel FLOW - User Manual

Other manuals for Conel FLOW

Instruction Manual8 pages

Assembly And Operating Instructions48 pages

Operating Instructions24 pages

Questions and Answers

T
Teresa LaneAug 14, 2025
What to do if the suction line of my Conel Accessories is polluted?
- E
  Elizabeth YorkAug 14, 2025
  If the suction line of your Conel Accessories is polluted, it could be due to several reasons: * The pump might be blocked. * The pump switching machine may not be working correctly. * The picking points might not be closing completely. To resolve this, check the suction line for any contamination. If necessary, clean and rinse it. Remove the pump, remove the blocker ground, and clean it. Also, remove and clean the pump switcher. Completely drain the contaminated water and rinse with clean water until all residues are removed.
L
lauramorganAug 17, 2025
What to do if my Conel Water Pump motor is idle?
- B
  Brian StephensAug 17, 2025
  If the motor of your Conel Water Pump is idle, there might be several reasons. First, ensure that voltage is present by checking the power supply and make sure the plug is properly plugged in. Another reason may be that the pump is blocked by mud or solids, in this case you should clean the tank and pump body. If these steps don't resolve the issue, the motor or electronics may be defective, requiring replacement by qualified personnel.
E
Emily SanchezAug 20, 2025
Why is there a low flow rate in my Conel Water Pump?
- C
  Curtis OlsonAug 20, 2025
  A low flow rate in your Conel Water Pump can occur for several reasons. The outlet piping might be clogged or kinked, in which case you should clean or remove the kink. Also, the check valve could be contaminated, so cleaning it may help. Finally, the head might be too large, and reducing it could improve the flow rate.
S
Stephanie HarrisAug 23, 2025
What to do if my Conel Water Pump motor is running, but not delivering water?
- S
  Stephanie NorrisAug 25, 2025
  If the motor of your Conel Water Pump is running but not delivering water, it could be due to a clogged or kinked outlet piping. Cleaning or removing the kink may solve the issue. Alternatively, the check valve might be contaminated, so cleaning it is recommended.
M
Michael RogersAug 27, 2025
How to fix a Conel Water Pump that does not operate automatically?
- K
  Kyle McbrideAug 27, 2025
  If your Conel Water Pump does not operate automatically, the float switch may be contaminated; try cleaning it. If that doesn't work, the micro-switch may be defective, requiring replacement by qualified personnel.
J
Judy MunozAug 30, 2025
What to do if my Conel FLOW Water Pump motor is idle or does not start?
- A
  Anita AlvarezAug 30, 2025
  If your Conel Water Pump motor is idle or not starting, first ensure that the power supply is active and the pump is properly plugged in. A blocked pump due to mud or solids can also prevent starting; clean the tank and pump body to resolve this. If the motor or electronics are defective, have them replaced by qualified personnel.
L
Linda RogersSep 2, 2025
What to do if my Conel FLOW motor is running, but the pump does not deliver water?
- C
  Cynthia NelsonSep 3, 2025
  If your Conel Water Pump is running but not delivering water, the outlet piping might be clogged or kinked; clean or remove the kink. Also, the check valve could be contaminated, requiring cleaning.
C
charles39Sep 6, 2025
Why is the flow rate low in my Conel Water Pump?
- H
  hreedSep 6, 2025
  A low flow rate in your Conel Water Pump may be due to several factors. The outlet piping might be clogged or kinked, requiring cleaning or removal of the kink. A contaminated check valve can also restrict flow, so clean it. Lastly, an excessive head might be the issue; reduce the head to improve flow.
S
Susan MillerSep 9, 2025
Why does my Conel Water Pump not operate automatically?
- C
  Charles Chandler DDSSep 10, 2025
  If your Conel Water Pump does not operate automatically, the float switch may be contaminated and needs cleaning. Alternatively, the micro-switch could be defective, requiring replacement by qualified personnel.

Summary

Important Basic Information

Scope of Delivery

Details the items included in the Conel Flow Rain-Champion package.

Responsibilities of Manufacturer and Operator

Defines the duties of the manufacturer and the operator for safe and correct use.

Legal Notices and Conventions

Covers legal aspects, document structure, and signal word conventions.

Limits of Use and Intended Applications

Explains how the system works, intended use, and foreseeable misuse.

Safety and Hazard Management

Safety Instruction Conventions

Explains symbols and conventions used for safety instructions in the manual.

Safety Signs and Warning Labels

Details the safety signs on the product and their importance for compliance.

Hazardous Situations and Protective Measures

Identifies potential hazards during product lifecycle and necessary protective actions.

Technical Specifications

Hydraulic and Electrical Data

Provides key hydraulic and electrical parameters of the Conel Flow Rain-Champion.

Operating Data and Performance Curves

Details operating conditions, noise levels, and flow rate performance charts.

Dimensions and Weight

Lists the physical dimensions and weight of the Conel Flow Rain-Champion.

System Structure and Functionality

Construction Overview

Details the main components and assembly of the Conel Flow Rain-Champion.

Operational Principles

Explains the system's operation for rainwater and drinking water supply.

Delivery, Transport, and Unpacking

Security Measures for Handling

Ensures safe practices during delivery, transport, and unpacking of the unit.

Delivery and Unpacking Procedures

Instructions for checking packaging, reporting damages, and unpacking the product.

In-House Transport Guidelines

Recommendations for safely moving the unit within a building.

Storage Conditions and Security

Storage Security and Liability

Notes on manufacturer liability for damage due to incorrect storage conditions.

Recommended Storage Environment

Specifies temperature, dryness, and protection from environmental factors for storage.

Installation Environment and Setup

General Security for Setup

Highlights safety precautions, including electrical and physical hazards during setup.

Site Preparation and Conditions

Details room requirements, floor drains, ventilation, and mounting considerations.

Installation and Connection Guide

Security During Installation

Emphasizes safety protocols for personnel and system integrity during installation.

Wall Mounting Instructions

Provides guidance on securely mounting the unit to a wall.

Water Supply Line Connections

Details connections for drinking water, suction, and pressure lines.

Electrical Component Connections

Guides on connecting the control unit and electrical components of the system.

Initial Commissioning

Commissioning Security Precautions

Highlights safety measures and risks during the initial commissioning phase.

Step-by-Step Commissioning Process

Detailed instructions for starting and testing the system for the first time.

Troubleshooting Initial Commissioning Errors

Addresses common causes of errors and their remedies during initial startup.

Operating Modes and States

Security During Operation

Essential safety guidelines to follow during the normal operation of the unit.

Normal Commissioning and Startup

Procedures for starting the system after downtime or shutdown.

Normal Operation and Maintenance Checks

Guidance on continuous operation and recommended regular checks.

Troubleshooting Common Issues

Troubleshooting Security Protocols

Safety measures to observe when troubleshooting the Conel Flow Rain-Champion.

Error Detection and Initial Fault Measures

How to detect errors and perform initial steps to resolve them.

Maintenance and Inspection Schedule

Security During Maintenance

Safety precautions required for carrying out inspection and maintenance tasks.

Inspection Procedures and Checks

Guidelines for regular visual and functional checks of the system components.

Detailed Inspection and Maintenance Measures

Table of measures, implementation, and recommended periods for system upkeep.

CE Compliance

EU Declaration of Conformity

Official declaration stating compliance with relevant EU directives and standards.

Summary

Important Basic Information

Scope of Delivery

Details the items included in the Conel Flow Rain-Champion package.

Responsibilities of Manufacturer and Operator

Defines the duties of the manufacturer and the operator for safe and correct use.

Legal Notices and Conventions

Covers legal aspects, document structure, and signal word conventions.

Limits of Use and Intended Applications

Explains how the system works, intended use, and foreseeable misuse.

Safety and Hazard Management

Safety Instruction Conventions

Explains symbols and conventions used for safety instructions in the manual.

Safety Signs and Warning Labels

Details the safety signs on the product and their importance for compliance.

Hazardous Situations and Protective Measures

Identifies potential hazards during product lifecycle and necessary protective actions.

Technical Specifications

Hydraulic and Electrical Data

Provides key hydraulic and electrical parameters of the Conel Flow Rain-Champion.

Operating Data and Performance Curves

Details operating conditions, noise levels, and flow rate performance charts.

Dimensions and Weight

Lists the physical dimensions and weight of the Conel Flow Rain-Champion.

System Structure and Functionality

Construction Overview

Details the main components and assembly of the Conel Flow Rain-Champion.

Operational Principles

Explains the system's operation for rainwater and drinking water supply.

Delivery, Transport, and Unpacking

Security Measures for Handling

Ensures safe practices during delivery, transport, and unpacking of the unit.

Delivery and Unpacking Procedures

Instructions for checking packaging, reporting damages, and unpacking the product.

In-House Transport Guidelines

Recommendations for safely moving the unit within a building.

Storage Conditions and Security

Storage Security and Liability

Notes on manufacturer liability for damage due to incorrect storage conditions.

Recommended Storage Environment

Specifies temperature, dryness, and protection from environmental factors for storage.

Installation Environment and Setup

General Security for Setup

Highlights safety precautions, including electrical and physical hazards during setup.

Site Preparation and Conditions

Details room requirements, floor drains, ventilation, and mounting considerations.

Installation and Connection Guide

Security During Installation

Emphasizes safety protocols for personnel and system integrity during installation.

Wall Mounting Instructions

Provides guidance on securely mounting the unit to a wall.

Water Supply Line Connections

Details connections for drinking water, suction, and pressure lines.

Electrical Component Connections

Guides on connecting the control unit and electrical components of the system.

Initial Commissioning

Commissioning Security Precautions

Highlights safety measures and risks during the initial commissioning phase.

Step-by-Step Commissioning Process

Detailed instructions for starting and testing the system for the first time.

Troubleshooting Initial Commissioning Errors

Addresses common causes of errors and their remedies during initial startup.

Operating Modes and States

Security During Operation

Essential safety guidelines to follow during the normal operation of the unit.

Normal Commissioning and Startup

Procedures for starting the system after downtime or shutdown.

Normal Operation and Maintenance Checks

Guidance on continuous operation and recommended regular checks.

Troubleshooting Common Issues

Troubleshooting Security Protocols

Safety measures to observe when troubleshooting the Conel Flow Rain-Champion.

Error Detection and Initial Fault Measures

How to detect errors and perform initial steps to resolve them.

Maintenance and Inspection Schedule

Security During Maintenance

Safety precautions required for carrying out inspection and maintenance tasks.

Inspection Procedures and Checks

Guidelines for regular visual and functional checks of the system components.

Detailed Inspection and Maintenance Measures

Table of measures, implementation, and recommended periods for system upkeep.

CE Compliance

EU Declaration of Conformity

Official declaration stating compliance with relevant EU directives and standards.

Conel FLOW Specifications

General

Brand	Conel
Model	FLOW
Category	Water Pump
Language	English

Related product manuals

Conel FLOW - User Manual

Table of Contents

Other manuals for Conel FLOW

Questions and Answers

Summary

Important Basic Information

Scope of Delivery

Responsibilities of Manufacturer and Operator

Legal Notices and Conventions

Limits of Use and Intended Applications

Safety and Hazard Management

Safety Instruction Conventions

Safety Signs and Warning Labels

Hazardous Situations and Protective Measures

Technical Specifications

Hydraulic and Electrical Data

Operating Data and Performance Curves

Dimensions and Weight

System Structure and Functionality

Construction Overview

Operational Principles

Delivery, Transport, and Unpacking

Security Measures for Handling

Delivery and Unpacking Procedures

In-House Transport Guidelines

Storage Conditions and Security

Storage Security and Liability

Recommended Storage Environment

Installation Environment and Setup

General Security for Setup

Site Preparation and Conditions

Installation and Connection Guide

Security During Installation

Wall Mounting Instructions

Water Supply Line Connections

Electrical Component Connections

Initial Commissioning

Commissioning Security Precautions

Step-by-Step Commissioning Process

Troubleshooting Initial Commissioning Errors

Operating Modes and States

Security During Operation

Normal Commissioning and Startup

Normal Operation and Maintenance Checks

Troubleshooting Common Issues

Troubleshooting Security Protocols

Error Detection and Initial Fault Measures

Maintenance and Inspection Schedule

Security During Maintenance

Inspection Procedures and Checks

Detailed Inspection and Maintenance Measures

CE Compliance

EU Declaration of Conformity

Summary

Important Basic Information

Scope of Delivery

Responsibilities of Manufacturer and Operator

Legal Notices and Conventions

Limits of Use and Intended Applications

Safety and Hazard Management

Safety Instruction Conventions

Safety Signs and Warning Labels

Hazardous Situations and Protective Measures

Technical Specifications

Hydraulic and Electrical Data

Operating Data and Performance Curves

Dimensions and Weight

System Structure and Functionality

Construction Overview

Operational Principles

Delivery, Transport, and Unpacking

Security Measures for Handling

Delivery and Unpacking Procedures

In-House Transport Guidelines

Storage Conditions and Security

Storage Security and Liability

Recommended Storage Environment

Installation Environment and Setup

General Security for Setup

Site Preparation and Conditions