CONFLOW UNIWORLD Series - Cover Removal

UNIWORLD Series M/UNIWORLD-M/E ed. 01 2020
WWW.CONFLOW.IT Page 10
3.4 – COVER REMOVAL
Figure 5: Cover Removal
ATTENTION
PSL202 AMS – PSL 210 AMS ( IP65 )
PSL201 – 210 ( IP65 )
Remove the handwheel loosening it, pull the cover
upwards.
PSL214 AMS and PSL202- 210 AMS ( IP67 )
PSL214 and PSL202-210 ( IP67 )
Remove the handwheel by loosening the locking grub
screw, remove the locking screws of the actuator cover, pull
the cover upwards.
For electrical connection, there is no need to remove the
cover.
PSL320 AMS – PSL 325 AMS ( IP65 )
PSL320 - 325 ( IP65 )
Unscrew the locking screws of the actuator.
Pull the cover upwards.