CONFLOW UNIWORLD Series - Psl Basic Version Wiring Diagrams

UNIWORLD Series M/UNIWORLD-M/E ed. 01 2020
WWW.CONFLOW.IT Page 13
3.6.2 – “PSL BASIC” VERSION WIRING DIAGRAMS
According to the dimensions of the actuator, the electrical terminals are positioned under the cover. Having
completed the connection, close the cover of the terminal box and the actuator well and tighten the cable glands to
ensure protection as outlined in the specifications.
The wiring diagram can differ based on the actuators in the special version.
X1 = Not used
X2 = Internal cable
X3 = Not used
X4 = Potentiometer 1
0-1000 Ohm
(optional)
X5/1 = Neutral
X5/2 = Phase to Open
X5/4 = Phase to
Close
X7 = Internal cable
X9 = Potentiometer 2
0-1000 Ohm
(optional)
X0 = Potentiometer 1
with PSAP
X11 = Potentiometer
1 with PSAP
connected to X9 for
output 0-1000 Ohm
X3
X0
0
X5/1
X5/4
X5/2