Left front : 1500 W (180 mm)
right front : 2000 W (180 mm)
right back : 1500 W (180 mm)
6400-7200 W
- 22 -
Problem Possible causes What to do
F3 - F8
F9 - FE
Temperature sensor failure
Temperature sensor of the
IGBT failure.
Please contact the
supplier.
E1 / E2 Abnormal supply voltage
Please inspect whether
power supply is normal.
Power on after the power
supply is normal.
E3 / E4 Abnormal temperature Please inspect the pot.
E5 / E6 Bad induction hob heat
radiation
Please restart after the
induction hob cools down.
Supply Voltage
Product Size (L*P*H) 590 x 520 x 60 mm
Building-in Dimensions (L*P) 560 x 490 mm
N.W. 10,0 kg
Power
Power of zone
Left back : 2000 W (180 mm)
Failure Display and Inspection
Technical Specification
If an abnormality comes up, the induction hob will enter the protective
state automatically and display corresponding protective codes:
We decline liability for any damage or accident derived from any use of
this product which is not in conformity with the instructions contained in
this booklet.
220V-240V~ / 400V 3N~ 50/60Hz
F refA R
TI6012
To Next Page