EasyManua.ls Logo

CONFORAMA TI6012 - Operation and Maintenance; Hot Surface Hazard; Cut Hazard

CONFORAMA TI6012
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 3 -
• This appliance is to be properly installed and earthed only by a suitably
qualified person.
• This appliance should be connected to a circuit which incorporates an
isolating switch providing full disconnection from the power supply.
• Failure to install the appliance correctly could invalidate any warranty or
liability claims.
Operation and maintenance
Hot Surface Hazard
• Do not let your body, clothing or any item other than suitable cookware
contact the Induction glass until the surface is cool.
• Beware: magnetisable metal objects worn on the body may become hot in
the vicinity of the cooktop. Gold or silver jewellery will not be affected.
• Keep children away.
• Handles of saucepans may be hot to touch. Check saucepan handles do
not overhang other cooking zones that are on. Keep handles out of reach
of children.
• Failure to follow this advice could result in burns and scalds.
Cut Hazard
• The razor-sharp blade of a cooktop scraper is exposed when the safety
cover is retracted.
• Use with extreme care and always store safely and out of reach of
children.
• Failure to use caution could result in injury or cuts.
Important safety instructions
• Never leave the appliance unattended when in use. Boilover causes
smoking and greasy spillovers that may ignite.
• Never use your appliance as a work or storage surface.
• Never leave any objects or utensils on the appliance.
• Never use your appliance for warming or heating the room.
operation.
The temperature of accessible surfaces may be high when the device is in
place metal objects such as knives,
forks,spoons and lids on the cooking, because they get hot.
It is recommended that you do not