Need help?Do you have a question about the Connex FALCON 2 and is the answer not in the manual?
Connect power cord, plug into outlet, and check LED status. Projector enters standby mode.
Turn on/off via remote or front cover. Projector displays a boot sequence on screen.
Use projector to share content from wired devices or USB flash drives independently.
Adjust projector angle using Keystone Correction dial and image focus with Lens Focus dial.
Connect USB drive, select 'Multimedia', navigate files with directional keys, and play using OK or Play/Pause.
Connect 3-in-1 cable to Video Input, select AV source, and confirm with OK button.
Connect HDMI cable to HDMI Input, select HDMI source, and confirm with OK button.
Connect VGA cable to VGA Input, select VGA source, and confirm with OK button.
Connect a 3.5mm jack cable to the audio output port on the projector.
Connect via data, WiFi, or USB cable. Follow on-screen prompts for pairing and connection.
Connect via wireless display/multiscreen or USB tethering. Use 'Smart View' or 'USB tethering'.
Connect iOS device via Apple data cable to USB 2 port. Trust device when prompted.
Connect Android device via data cable to USB2. Enable 'USB tethering' in settings.
Avoid water contact. Do not handle if dropped in water. Ensure hands are dry before touching plugs.
Do not operate with damaged cord or plug. Ensure hands are dry before touching plugs.
For personal use only; commercial use voids warranty. Supplier not liable for misuse.
Not for unsupervised children. Supervise children and keep packaging away.
Do not cover vents. Maintain 10 cm distance for sufficient airflow.
Ensure projector is unplugged from any device or power source before maintenance.
Use soft, damp cloth for surface; dry microfiber for lens. Avoid harsh chemicals.
Avoid direct sunlight, high temperatures, and storage above 60°C.
Do not dispose as urban waste. Take to a special local collection center or dealer.
Do not mix used electronics with ordinary solid waste due to toxic substances.
Product and company names are trademarks. HDMI terms are trademarks of HDMI Licensing LLC.
12-month warranty against manufacturing defects. Return with proof of purchase for exchange or repair.
Excludes wear/tear, misuse, accidental damage, force majeure, and operating contrary to manual.
Follow store's return policy. Contact store for further assistance or questions.
To Next Page
General