Conrad Electronic RC Logger 2 - User Manual

40
Legal notice
These operating instructions are published by CEI Conrad Electronic International (HK) Limited,
28th Floor & 2903-9, Pacifi c Plaza, 418 Des Voeux Road West, Hong Kong.
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfi lming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
The operating instructions refl ect the current technical specifi cations at time of print. We reserve the right to change the
technical or physical specifi cations.
© 2012 by CEI Conrad Electronic International (HK) Limited
Impressum
Diese Bedienungsanleitung ist eine Publikation der CEI Conrad Electronic International (HK) Limited,
28th Floor & 2903-9, Pacifi c Plaza, 418 Des Voeux Road West, Hong Kong.
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B. Fotokopie, Mikroverfi lmung, oder die
Erfassung in elektronischen Datenverarbeitungsanlagen, bedürfen der schriftlichen Genehmigung des Herausgebers.
Nachdruck, auch auszugsweise, verboten.
Diese Bedienungsanleitung entspricht dem technischen Stand bei Drucklegung. Änderungen in Technik und Ausstattung
vorbehalten.
© 2012 by CEI Conrad Electronic International (HK) Limited
V1_0712-HL
Operating instructions
Bedienungsanleitung
Digital Pitch Gauge 2 Page 4 – 19
Digitale Pitchlehre 2 Seite 20 – 36

Conrad Electronic RC Logger 2 Specifications

General

Brand	Conrad Electronic
Model	RC Logger 2
Category	Measuring Instruments
Language	English

Summary

Legal notice

Impressum

1. INTRODUCTION

13. TECHNISCHE DATEN

2. INTENDED USE

3. DELIVERY CONTENT

4. SAFETY INSTRUCTIONS

Persons; Product

Safety precautions related to users and the product itself.

12. ENTSORGUNG

5. OPERATING ELEMENTS

6. INSERTING; CHANGING BATTERIES

7. PREPARATION

Basic settings of the rotor head

Initial setup steps for the rotor head.

Grundeinstellung des Rotorkopfs

Initial setup of the rotor head components.

Ein- und Ausschalten der Pitch-Einstelllehre

Instructions for turning the pitch gauge on and off.

Kalibrieren der Pitch-Einstelllehre

Process for calibrating the pitch gauge for accuracy.

11. STARTEN DER MESSUNG

Turning the pitch gauge on; off

How to power the pitch gauge on and off.

Calibrating the pitch gauge

Steps to calibrate the pitch gauge for optimal performance.

Setting the reference zero

Steps to establish a zero reference point before measurement.

Measuring the swashplate

Detailed steps for measuring the swashplate angle.

8. EINFACHER BETRIEB

Befestigen der Pitch-Einstelllehre

Methods for attaching the pitch gauge to an RC helicopter.

Ablesen der Messwerte

How to read the inclination angles displayed by the gauge.

Schutz der Pitch-Einstelllehre

How to protect the pitch gauge from damage.

10. SETTING THE REFERENCE

Setting up a profile

How to save and use custom measurement profiles.

Setting the main shaft as the reference

How to use the main shaft as a reference for measurements.

Setting the motor as the reference

How to use the motor as a reference for measurements.

9. PROFILFUNKTION

Protect the pitch gauge

Instructions for attaching protective gear to the pitch gauge.

Pitch; roll value and alarm function

How the gauge indicates measurement results and alerts.

Einrichten eines Profils

Step-by-step guide to creating new measurement profiles.