50
☞
First, insert the batteries in the base station and then in the tempera-
ture/air humidity sensor. See the chapter "Commissioning".
The use of rechargeable batteries is not recommended, as their lower voltage (accu-
mulator = 1.2 V, battery = 1.5 V) and capacity reduces the service life. Therefore, we
recommend that you use high-quality alkaline batteries in order to allow for long-last-
ing and reliable operation.
The base station requires three batteries type AA/mignon (e.g. Conrad order no.
650117).
The temperature/air humidity sensor requires two batteries type AA/mignon (e.g.
Conrad order no. 650117).
For the proper disposal of batteries, please read the chapter „Disposal“.
To Next Page
Loading...
