5
Placement
Do not put the unit in cold/
freezing areas.
There should be enough free
space around the unit as shown
to allow proper ventilation
The back panel
should have a
minimum gap of 4”
3.9”
3.9” 3.9”
The unit should be placed in a
ventilated & dry environment.
Do not put the unit in direct
sunlight and keep it as far as
possible from heat sources.
The unit should be placed on
flat, leveled and sturdy surface.
K e ep th e u n i t l ev el s b y
adjusting the front legs.
To Next Page
Loading...