OPERATING & INSTALLATION INSTRUCTION 2-POST-LIFT
Foreword
Your Consul lift has been design-tested in its basic concept, it offers you maximum economic efficiency and
safety. It is up to you to make use of these advantages.
A prerequisite for this is correct operation, perfect maintenance and good care of the lift. Please read these
operating instructions carefully. They provide you with all necessary data and show how simple it is to keep
your lift ready for use at all times.
Your Consul lift is only designed to raise automobiles or vehicles whose total weight does not exceed the
lifts’s maximum permitted load capacity and whose specified support points are within the lift’s support area.
All 4 locating points have to be used.
Your Consul lift is designed to raise motor vehicles. The carrying of people is not permitted. When using the
lift in lacquering plants or rooms in which a large amount of work is carried out with solvent-containing
materials, pay attention to the risk of explosion. In its standard form the drive is not protected against
explosion.
Safety devices
Your lift is equiped with several safety devices, to ensure workers safety, if the list is used according to this
manual.
Please take care of this safety devices, when installing the lift and check them after any case of failure.
Only trained service people are allowed to repair this lift.
Only original parts are to be used for repair. If third parts equipment is used for repair, the CE certificate of
conformity will be avoided.
In accordance with the regulations regarding the operation of lifts, lift devices must be checked for their
operational safety by an expert at the latest after one year (BGG 945).
The control has to be notified in the check list.
In this respect please pay attention to ensuring that only company-trained experts, who have been instructed
in the function of lifts and who are in possession of a certificate from the manufacturing company, check and
accept your lift.
Page 6
To Next Page
Loading...
