EasyManua.ls Logo

Consul CQG22 - Operating with the Electric Kit

Consul CQG22
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
0
Your Refrigerator can be converted
to work with electricity by using an
electric kit.
The kit is an optional feature that
can come already installed with
your Refrigerator or can be
acquired and installed later.
To operate with electricity, if the
Refrigerator already has the kit
installed, use the following
procedures:
For your total safety, all electrical
appliances should be adequately
grounded.
Thus, attach a ground wire from
your Refrigerator (the green wire
attached to the rear hauling
frame) to an efficient ground.
If the power supply cord is
damaged, it shall be replaced by
the assistance shop (or dealer) in
order to avoid the risk of
accidents.
To adjust the temperature of your
Refrigerator use the temperature
control on the console panel.
OPERATION WITH THE
ELECTRIC KIT
ATTENTION
Never use gas and electricity
simultaneously.
ENGLISH
Electric
Temperature
Control
The product does
not work in this
position
Check that the electric system
where the Refrigerator is to be
installed uses number 14 AWG
or equivalent (1.5 mm
2
) wire,
complying with official
standards.
Make sure that the voltage to be
used by your appliance is
compatible with the electric
system.
Always use an exclusive plug, do
not use extension cords or
multiple plugs to hookup your
appliance.

Related product manuals