Contax 159MM User Manual

(Mounting
the Lens)
First remove
the
camera-body
cap
and then
insert
the
lens
mount
into
the
camera-body
mount,
matching
the red
dot on
the lens
mount
with that
on
the
camera
body.
Then,
gripping
the lens
barrel
firmly,
turn
the lens
clockwise
until
it locks
with
a click.
When
using
a
lens
cap
of the
snap on type,
attach
or
remove
it
from
the lens
by
pressing
in
the
two
side-tabs.
(RemovinE
the Lens>
While
pressing
the lens
release
button,
turn
the
lens
counterclockwise
slightly
and remove
it
from
the
camera-
body mount.
Always
keep
caps
on the
camera-body
mount
and the
lens
mount
when
the lens
is left
off the
camera.
o
Avoid
touching
camera
interior
or lerrs
surface
with
your
fingers.
o
Avoid
direct
sunlight
when removing
or mounting
the
lens
with
film loaded
in
the
camera.

Contax 159MM Specifications

General

Brand	Contax
Model	159MM
Category	Digital Camera
Language	English