Contax Aria User Manual

42
<Viewfinder Display>
The viewfinder display is an information intensive
finder which displays exposure indicators such as
aperture, shutter speed, exposure meter,
exposure counter, etc.
@ Flash Mark
When using the TLA flash system for taking
flash pictures, the flash mark * 4 ” will appear
as soon as the flash is fully charged. If your
subject is correctly exposed, it will blink two
seconds after the flash has fired (see pages
146 and 147).
® Shutter Speed
The camera displays the shutter speeds from
1/4000 sec. to 16 sec. “4000” means 1/4000
sec. and “125” means 1/125 sec., and “16”
means 16 sec. (see page 90).
G Aperture Value
In the aperture-priority auto exposure (Av) and
manual exposure (M) modes, the aperture you
have selected is displayed in the viewfinder. In
the shutter speed-priority (Tv) and
programmed auto exposure (P) modes, the
displayed aperture is the aperture selected by
the camera in accordance with the shutter
Speed you have selected (see page 90).
@ Metering Mark
This mark indicates the metering mode and AE
lock.
Evaluative metering mode:
The “ © ” mark lights (see page 118).
Center-weighted average light metering mode:
The * CJ" mark lights (see page 118).
Spot-metering mode:
The “ (*) " mark lights (see page 120).
Evaluative metering and AE locked mode:
The " 2 " mark blinks.
Center-weighted average light metering and
AE locked mode:
The * C)" mark blinks.
Spot metering and AE locked mode:
The " e " mark blinks.
& *M" Mark
This mark indicates that the exposure mode
has been set to "M" or “X” (see pages 112 and
162).

Contax Aria Specifications

General

Brand	Contax
Model	Aria
Category	Digital Camera
Language	English