Contax Aria - Page 31

3 Now turn main switch off to complete film
speed setting.
e The film speed setting can also be completed
by depressing the shutter release halfway or by
leaving the camera idle for 16 seconds.
@ When the film speed setting is made, the
exposure counter reading replaces the film
speed value.
The set film speed is stored until it is reset.
66
ISO Button/ISO-Taste
Bouton ISO/Botön ISO
Ke
8)
DRIVE
<Checking the Film Speed>
Turn the main switch on and press the ISO
button to display the film speed setting on the
display panel for about 16 seconds. “DX” and the
film speed is displayed in DX mode.