Contax Aria - Page 65

140
A.B.C. Lever
A.B.C.-Hebel
Levier A.B.C.
Palanca de A.B.C.
Move the A.B.C. lever to set the
compensation value. The camera will
switch to the A.B.C. mode. Two compensation
values are available: +0.5 EV and +1 EV.
e When the exposure compensation dial is set to
a position other than “0”, the A.B.C. mode is
established on the basis of the compensation
value being set.
e Metering takes place during each exposure
and the measured value is compensated for.
When shooting under conditions unaffected by
changes in ambient brightness, use the AE
lock in the A.B.C. mode.
e After taking pictures in the A.B.C. mode, be
sure to return the A.B.C. lever to “0.”
e Flash pictures cannot be taken in the A.B.C.
mode.