Contax G2 - Page 24

50
Data back contacts
Data-Back-Kontakt
Contacts du dos doter `
Contactos del respaldo. `
de datos Bo
Open the camera back by erecting and Insert the film cassette slantwise into the
rotating the camera back release knob in film chamber with its protruding end
the direction of the arrow. downward as illustrated.
After the camera back is opened, replace the
knob in place. Note on the shutter curtain:
The shutter curtain is a precision part.. Never
@ When loading film, be sure to remove the touch it with your finger or strike it with the film
protective sheet in the camera’s picture area tip. When the film tip lies on the shutter curtain,
frame. in particular, never trip the shutter.
@ Take care not to touch or contaminate the DX
contacts and data back contact.
@ Always load and unload a film in subdued light.