Contax G2 - Page 25

Pull out the film tip as far as the orange
"fr mark and place it on the spool.
Take care that the film does not float up (see
illustration).
e If the length of film protruding from the
cassette is too long, adjust it by winding film
back into the cassette before loading the film.
52
4. Close the camera back securely.
As soon as the camera back is closed, the film
advances automatically and stops when the
exposure counter shows “01”.
e |f the exposure counter blinks at “00”, the film
is not advancing properly. Open the camera
back and reload the film correctly.