Contax G2 - Page 31

Index
Index
Repere
Indice
The following drive modes can be selected.
To select amode, turn the drive mode dial
until the mode aligns with the index mark.
@ Be sure the dial stops securely at one of the
click indents (do not attempt to set the dial
between marked settings).
64
“S” Mode: Single-frame Shooting
Each time the camera’s shutter release is
pressed, one film frame is exposed and the film is
wound to prepare for the next exposure.
“CH”, “CL” Modes: Continuous shooting
While pressing the camera's shutter release, a
maximum speed of about 4 frames/second (CH)
or about 2 frames/second (CL) are exposed
automatically. (The actual drive speed depends
on various conditions, including the set shutter
speed, film speed, and battery condition. Also,
when using an optional data back, drive speed
will depend on whether the “between-frame”
printing function is used.)
“X”: Self-Timer Mode
Set to this position to perform self-timer
photography. For details see page 170.
“wm”: Multiple-Exposure Mode
Set to this position to perform multiple-exposure
photography. For details, see page 164.