Contax G2 - Page 33

Be sure your fingers do not obstruct or rest on the
lens, AF windows, infrared emitter, or ISO button.
: e /f the entire display inside the viewfinder blinks, it means
To take sharp pictures, the camera must be held the ISO button has been pressed and the camera is in
steady. Blurred pictures are most often caused the film-speed setting mode, making it impossible to
by camera shake. : d take pictures. In this case, check to be sure the film
The camera can be held not only in the horizontal speed has not been changed accidentally.
position, but also in the vertical position
depending on the subject. In any case, study
your comfortable camera positioning and
practice until you get used to it. It is also good to
support your body or camera with a building,
tree, and so on.
Be sure to remove the lens cap before you shoot!
@ Relax the hand and gently depress the shutter release.
At the moment to take pictures, stop breathing.
® Tighten your side, and stabilize the camera.