Contax G2 - Turn on the Main Switch

72
As soon as the entire roll of film is exposed,
the camera rewinds the film automatically.
While the film is rewinding, the exposure counter
counts down. When rewinding is completed, the
motor stops and number “00” in the counter
blinks.
Confirm that the motor has stopped and the
exposure counter is blinking on “00”, then open
the camera back and remove the film cassette.
Strap Stopper
Manual
Rewind
Button
Riemenshnalle
=
Rückspulstarttaste
Barretto
dela
`
u
Bouton
de
rembobinage
manuel
COUITOIG
o
S
Botón
de
rebobinado
manual:
`
Tope
de
la
correa
e Always unload a film in subdued light.
@ Be sure to unload the film after it has rewound.
After the film has been rewound, the camera
will not operate unless the camera back is
once opened.
e To rewind film from midway through a roll, use
the projection on the camera strap stopper to
press the manual rewind button on the side of
the camera body (do not use pins, needies or
other sharply pointed objects).
@ Take the exposed film for processing as soon
as possible.