Contax G2 - Page 47

104
Focusing distance
Einstellentfernung
Distance de mise au point
Distancia de enfoque
e In the “MF” mode, if the focus lock button is
held depressed, the viewfinder shutter speed
display will change to show the distance at
which the lens is focused. In this way, you can
confirm the focusing distance without
removing your eye from the viewfinder.
<2. When you already know the correct
distance to the subject>
1 Set the focus mode dial to “MF”.
While looking at the display panel, rotate
the focus dial until the correct distance to
the subject appears on the panel.