Contax G2 - Page 58

128
If there is a great difference in brightness
between the subject and its background, the
subject will not be correctly exposed. In this
case, use exposure compensation. Exposure
compensation can also be used for intentional
over- and underexposure. There are three
methods:
@ The exposure can be compensated by
controlling the shutter speed.
<1. Using the Exposure Compensation
Dial>
Normally, the exposure compensation dial is set
at “0”. To compensate exposure, turn and set the
dial so that your desired compensating value
comes opposite the dial index. It can be set in
1/3-EV increments within a range of +2EV to
-2EV. If the exposure compensation dial is set
anywhere except “0”, the “+” or “—” mark will turn
on in the viewfinder, indicating that the exposure
compensation is in effect.
“5321510705 4
D
H:
After taking pictures with exposure compensation, be
sure to return the dial to “0”.
e
Vergessen Sie nicht, nach Aufnahmen mit
Belichtungskorrektur den Ring wieder auf “0” zu
stellen.
e
Après avoir pris les photos avec la compensation
d’exposition, n'oubliez pas de ramener le cadran á la
position “0”.
e
Después de fotografiar con la compensación de la ex-
posición asegúrese de reponer el dial a la posición “0”.