Contax G2 - Page 80

Turn focus dial and set to shooting While holding focus lock button
distance. depressed, turn focus dial and set
to shooting distance.
W
Must operate drive mode dial before} Drive mode dial can be left set to
each exposure. “tm” so long as multiple exposures
are desired.
*2
All custom functions are reset to standard setting (“0”).
Be careful; if the main switch is set to OFF while the CLE setting has been
selected, the contents of all custom functions set to that point will be reset
to their standard setting (“0”).
@ Be sure when the shutter release is depressed halfway or approx. 16
seconds elapse, custom functions are reset to standard setting (“0”).
175