Contax G2 - When Using CAF (Continuous Auto Focus Mode)

218
<Contax Data Back GD-2 (Multi-function
Type)>
This multi-function data back can be used in
place of the Contax G2 camera back. It has a
“collective imprinting” function that can imprint
exposure data on shooting on the first two
frames of the film and a “between-the-frames”
imprinting function that can imprint dates and
exposure data between the frames. Because
both functions can be used together, it is
possible to record exposure data by setting the
“collective imprinting” function and record dates,
time or counter data between the frames so that
they can be extensively used for classification of
photos, storage and arrangement of exposure
data, etc. It also has an interval shooting function
for controlling the camera operation.
m Collective imprinting function
Exposure data on shooting of each frame are
recorded by the camera and these data are
imprinted collectively on the first two frames that
were advanced in blank
when the film is rewound.
Prints
@Date of film loading
(year, month, day and
hour)
@Camera used: “G2”
@Exposure data
(exposure compen-
sation value, shutter
speed, estimated F-
number (*), exposure
mode)
@Frame No. (every five
frames)
@®Date of film rewinding
(year, month, day and
hour)
SORES PRERE BESAR CC
(This illustration is shown
here for explanation. It is not
an actual example of display.)