Contax G2 - Page 99

E Between-the-frames imprinting function
It is possible to choose one of the following eight
modes and print data between film frames.
@Date (year, month and day)
@Date (month, day and year)
@Date (day, month and year)
(Y) Hour (day, hour and minute)
@®Exposure data on shooting (exposure
compensation value, shutter speed, estimated
F-number (*), exposure mode or two
characters)
($) Counter data (4-digit add-up counter +
exposure counter) + two characters
®© Desired 6-digit fixed number + two characters
No imprinting
(*) The “estimated F-number” in “Exposure data”
is indicated as an approximate value that was
calculated by measuring the brightness on
external metering and through conversion to
an F-number on the basis of this value. It is
useful only as a guide.
e When a filter is attached, the value is that on
which the exposure factor of the filter is
taken into account.
# W125 FSB
oO
O
oO
000000
E Interval shooting
{
00000
(This illustration is shown
here for explanation. It is
not an actual example of
display.)
The interval shooting function makes it possible
to take automatically the set number of pictures
at the set interval, starting from the set time. It is
convenient for observing changes with time or
unattended shooting.
219