Contax T3 - Shutter Release and Camera Handling

* ’-.-/i' v''-.'=\--' ■ . ■ ' . :'-
n
Shutter Helease Button
i , H--',:-'
! ■
Halfway Fully
Halfway dapreseed Fully depressea
The shutter release button is designed to be pressed in two stages,
the “halfway depressed” position, and the “fully depressed”
position. In the two positions, the shutter release button operates
as follows:
Halfway depressed:
Lens is focused and light on subject is metered.
Fully depressed:
Lens is extended to focusing position, shutter released, picture
taken and the film is wound to next frame.
^ To prevent camera shake, press the shutter release button
gently with the pad of your index finger. Be sure to oserve how
to hold the camera correctly as well (see p. 15).
If desired, the camera may be set so that the lens will extend to the
focus position when the shutter release button is in the halfway
depressed position (p. 47).
14