Contax T3 - Page 13

Using the mode button and mode dial allows the use of a wide
variety of photographic techniques. For details, see p. 38-46.
The mode button is used to switch between the modes shown in
the accompanying table, and the mode dial is used to change the
set values in each mode.
Setting Contents
Compensation
value: -2EV - +2EV
S) or B
Exposure
compensation (p. 38)
CD
Selftimer (p. 40)
Delay time: 10 sec or 2 sec
@
LT
Long-time
exposure (p. 42)
Shutter time: 1-180 sec
@
S F or MF
Focus mode select
and distance set.
Distance: 0.4m-infinity, AF
17