Contax T3 - Exposure Modes and Compensation

In this mode, the camera automatically measures the brightness of
the subject and seiects the optimum exposure from a preset
combination of shutter speeds and apertures. This mode provides
best resuits for snapshots.
"I Turn the main switch
from“e”to“P”.
The camera power turns on and
the programmed auto mode is
selected.
O Press the shutter
^ release button to make
the photograph.
<Programmed Automatic Exposure Control Table>
The available combinations of shutter speeds and apertures preset
by the programmed auto mode are shown in this table.
35