Contax T3 - Page 50

By replacing the standard camera back, the quartz-controlled LCD
Data Back Is linked with the operations of the camera body.
The automatic data function allows imprinting of date and time on
photographs.
<Attaching to the Camera>
© Open the standard camera back furnished with the camera;
use the provided accessory tool to press up the camera
back release pin, thus disconnecting and removing the
camera back.
@ Insert the data back’s upper hinge pin into the camera’s
mounting hole, then use the provided accessory tool to
press up the camera back release pin while inserting it into
the corresponding mounting hole on the camera.
Data Back Specifications
Type: Built-in quartz clock with LCD display (automatic calendar)
Imprint functions: Year/Month/Day; Day/Hour/Minute; No-imprint;
Month/DayA'ear; Day/Month/Year
imprint method: Automatic shutter-linked imprint
Film speed setting: Automatic
Power source: 3V Lithium battery (CR2025)
Dimensions: 100.5 (W) x 56 (H) x 16 (D) mm
Weight: 45 g (without battery)
* Note: specifications and design are subject to change without notice.
54