Contax T3 - Page 51

Year/Month/EDay
Day/Hour/Minute
button
No-Imprint
<Date and Time lmprint>
• The Data Back battery is factory installed, so the Data Back can be used
immediately.
(p Select the imprint mode
Each time the mode button is pressed, the imprint mode
changes in the following order: Year/Month/Day - ►
Day/Hour/Minute - ► . ( No-Imprint) - ► Month/DayA'ear - ►
Day/Month/Year. Set the imprint format as desired.
d) Press the shutter release button normally to take the
picture.
• The indicator at the upper right of the display will blink to indicate
that the selected display has been imprinted.
• The “M” above the number indicates “Month”, and is not imprinted.
• If you do not wish to imprint the date or time, set to-.
• The imprint will be at the lower right edge of each photograph. The
imprint may be difficult to read if the imprint's background area is a
bright color like white or yellow.
Continued on next page