Contax T3 - Page 54

<Using the Flash>
1. Using the TILA200
I ^ AUTO
I0|
i<l^
• Set TLA 200 zoom selector to
“35” (mm).
0 Set the camera’s flash
mode to “4“ ™
Either the internal flash, or
the TLA200 will be fired
automatically, depending on
the brightness of the subject.
® Set the TLA200’s power
(flash mode selector) to
“TTL” and set the camera’s
aperture In accordance
with the flash distances
noted on page 59.
The flash output is
automatically controlled to
provide optimum exposure
at the selected aperture.
d) Press the shutter release
button only after
confirming that both the
cameras’ internal flash
and the TLA200 are fully
recharged.
Either the camera’s internal
flash or the TLA200 will be
fired automatically,
depending on the camera-
to-subject distance.
58