Contax T3 - Page 53

This adapter has been specially designed to allow use of an
external flash unit on the Contax T3. When used with the Contax
TLA200 flash unit, the TLA200 can be linked electronically to the
camera for automatic exposure. When linked in this way, the
camera's built-in flash is automatically selected for pictures taken
within the range of that flash; when the focusing range is outside
the range of the internal flash, the external TLA200 flash will be
automatically selected, thus extending the flash capabilities.
The adapter also allows connection of an optional L Series cable
switch.
1 Series
Cable Switch
Socket
<lnstallation>
® Connect the flash adapter SA-2 to the camera body.
As shown in the illustration, insert the flash adapter’s guide pin
into the camera’s guide hole, and connect the mounting screw
securely to the camera’s tripod socket.
@ Mount the flash onto the flash adapter.
Slide the flash into the adapter’s mounting bracket securely until
it stops.
Consult the flash unit’s operating instructions for directions on
removing the flash unit.
I Continued on next page I
57