Contax T3 - Loading and Managing Battery

■ J Open battery
compartment cover
Using the hand strap adjuster
as shown, turn the battery
compartment cover counter¬
clockwise, so that its mark
is aligned with the mark on
the camera body.
2 Insert new battery
Be sure the battery poles are
oriented correctly as indicated
inside the battery compartment.
A single 3V lithium battery (type
CR2) is required.
O Close the battery
^ compartment by
aligning the mark on
the cover with the
mark on the camera body
and rotating the cover
clockwise.
<Battery Check>
After inserting a new battery,
operate the camera once; the
battery charge indicator “
should appear in the display