Edition 05/2021 - MC ULTIMA- Technical documentation - page 14
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
F. Main display
The main display shows the following information’s :
Press anywhere on the display for 3 seconds to put the machine in “standby” mode
The display shows :
Manometer M2
Pump & Network pressure
(Bar)
Manometer M1
Steam boiler pressure
(Bar)
Data related to the last
extraction carried out on
group 1
Data related to the last
extraction carried out on
group 2
To Next Page
Loading...
