Conti MC ULTIMA - How to Use the Machine

Edition 05/2021 - MC ULTIMA- Technical documentation - page 15
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
7 HOW TO USE THE MACHINE
7.1 Operating elements
 STEAM FUNCTION
Two steams tap levers « V » are provided to allow:
 The heating of liquids by spraying steam.
 The milk foam production to create Cappuccino or Macchiato.
The liquid to be heated should preferably be placed in a deep container.
The tip of the steam wand outlet must be immersed in the liquid, without touching the bottom of the
container.
The steam may also be used to sterilize and warm glasses.
After each use and absolutely after heating milk, always clean the stainless steel steam nozzle and the
outlet nozzles with a damp cloth, removing all traces present.
A rinsing of the steam lance inner holes is to be done by a short pulse on the lever downwards to release a
jet of steam.
 HOT WATER FUNCTION
One electric tap “E” are provided for preparing tea, grog, etc.
Be careful, not to be burnt by the pressure water spray.
For that, the valve is coupled to cold water mixing for adjusting the water T° for tea and avoids spitting hot
water.
 FILTERS
The machine is equipped with two types of filters: 1 cup (10 G) and 2 cups (18 G)
Each filter is operating with its own holder-filter to produce respectively 1 cup or 2 cups of coffee.
Filters need to be unclogged and clean, so they need to be cleaned almost once a day with hot water, by
being removed from the holder filters.
Take care to remove all residual traces of coffee and ensure proper cleanliness of perforations in the bottom
of the filter.